Boysen® Healthy Home™

Features:

Boysen® Healthy Home™ is a odor-less, low VOC, premium acrylic, water-based interior coating with exclusive Microban® antibacterial protection to give extra defense against bacteria such as E. coli and Salmonella, as well as mildew and fungus.

DESCRIPTION: Boysen® Healthy Home™ dries to a durable satin finish that makes it ideal for walls and ceilings in bedrooms, kitchens, bathrooms, as well as damp and humid areas where an added level of protection against microbes is desired. Microban® technology is incorporated into the paint at the manufacturing stage and does not wash or wear off for the duration of the paint’s service life.

PRINCIPAL USES: Boysen® Healthy Home™ is the ideal choice for residences, medical facilities, nursing homes, schools, day care facilities, and food commissaries. For interior surfaces such as concrete, drywall, and properly primed wood.

PRACTICAL COVERAGE: 25-30 square meter / 4 liters / coat

SURFACE DRY: Thirty (30) minutes

DRY THROUGH: Two (2) hours

DRY FILM THICKNESS: 1-1.5 mils/coat

OVERCOATING INTERVAL: Allow one hour before recoating.

THINNING: Use as supplied.

APPLICATION: paint brush, roller or airless spray

PACKAGING: 4-liter cans

COLORANTS: Use only factory or Mix-and-Match™ pre-mixed colors.

AVAILABLE COLORS:

B7410 Hygienic White
B7420 Light Tan
B7430 Clean Slate
B7440 Serene Lake
B7442 Fresh Air
B7450 Flora
B7460 Shining Ochre
B7470 Bloom
B7472 Rosy

* Also available in B7415 Semi-Gloss Hygienic White

SURFACE PREPARATION:

New Masonry:
Allow new masonry to dry 14 to 28 days under normal weather conditions before painting. Surfaces to be painted should be clean and dry, free from oil, grease, dust, dirt contaminants, and all loose grit and mortar. Treat new masonry with a solution of 1 part Boysen® Masonry Neutralizer #44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.

Repainting:
Remove all loose, scaling, flaking and peeling off paint using Boysen® Paint and Varnish Remover #141, wire brushing, scraping, or water blasting. Let dry. For chalking old paint, use Boysen® Masonry Surface Conditioner #304 as primer. In case of mildew infestation, treat with Boysen® Fungicidal Wash Solution #74 or bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, allow to stand on surface for overnight before washing off residue. Let dry.

PAINTING SCHEDULE:

Concrete / Drywall Surfaces
1st Coat: Boysen® Permacoat™ Flat Latex #701
Putty: Boysen® Masonry Putty #7311
2nd & 3rd Coat: Boysen® Healthy Home™

Wood Surfaces
1st Coat: Boysen® Flatwall Enamel #800
Putty: Boysen® Plasolux Glazing Putty #311
2nd & 3rd Coat: Boysen® Healthy Home™