EL KAP Marine Epoxy

Technical Details

EL KAPITAN MARINE EPOXY is a two-component epoxy that exhibits excellent adhesion and flexibility. When applied on wood, it renders the wooden surface impervious to water. In its cured state, it hardens and toughens the wood making it resistant to natural elements like salt, spray and sun, among others.

FEATURES

* The competitive edge of EL KAPITAN lies in its being an ALL-IN-ONE product. Unlike other brands where another non-sagging variant is required, EL KAPITAN is complete as it is also used for non-sagging applications.
* With more spreadable consistency versus other brands.
* With excellent flexibility. EL KAPITAN allows for reasonable movement and motion of wooden joints without the epoxy film cracking or losing adhesion.
* Hardens and toughens the wooden surface making it resistant to cracks even when there is impact from hard objects at sea like rocks, strong waves or the hulls of other marine vessels.
* Tinting color may be added to EL KAPITAN to give it color. NO NEED FOR TOPCOAT.

SPECIFICATION
Color Part A : White
Part B : Beige
Solid Content 100%
Mixing Ratio 1 part A : 1 part B
Setting Time 1-1.5 hours
Drying Time 3 hours
Full Cure 36-72 hours

USAGES

EL KAPITAN MARINE EPOXY is applied on the wooden hulls of marine vessels to harden and toughen the wood making it impervious to water and the elements.

* Can be used to patch and fill cracks or defects in wood.
* Recommended for the regular maintenance and upkeep of wooden hulls of marine vessels.

APPLICATION PROCEDURE

* SURFACE PREPARATION
1. Ensure surface is clean, free from dust, oil, grease and other chemicals.
2. If desired, smoothen the wood using sand paper.

* MIXING
1. Mix equal quantities of Part A and Part B. Mix thoroughly.
2. Prepare just the sufficient amount of the mixture for immediate use.
Once Part A is mixed with Part B, the mixture hardens within one hour.

* PRODUCT APPLICATION
1. Use a putty knife to apply the mixture.
2. A smooth finish is achieved by leveling off the mixture across the entire surface. Fill all gaps, cracks and crevices in the process.
3. Take out the excess epoxy mixture, if any
4. Allow to dry for 3 hours before sanding.
5. Full cure is achieved after 3 days.

PACKAGING
Available in:

* 1-gallon set
* 1 liter set
* ½ liter set
* ¼ liter set
* 1/8 liter set

SHELF LIFE
One (1) year

LIMITATIONS
Because of the variety of applications, properties of materials to be used on and differences of working conditions and methods, it is best to test application on a small surface to ensure effective bonding. Product guarantee is restricted to the quality upon the time of receipt of customer.

In no case shall our liability extend beyond replacement of defective products, if any, found at the time of receipt.